Diagnostic aids 3-35
7510
Configuration Menu
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold the 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Maintenance Counter Value See “Maintenance Counter Value” on page 3-37.
Reset Maintenance Counter See “Reset Maintenance Counter” on page 3-37.
USB Scan to Local
Black Only Mode
Print Quality Pages See “USB Scan to Local” on page 3-38.
SIZE SENSING See “SIZE SENSING” on page 3-39.
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing
Tray 4 Sensing
Statement/A5 See “A5/Statement” on page 3-40.
Executive/B5 See “B5/Executive” on page 3-40.
Panel Menus See “Panel Menus” on page 3-40.
PPDS Emulation See “PPDS Emulation” on page 3-40.
Factory Defaults See “Energy Conserve” on page 3-41.
Energy Conserve See “Energy Conserve” on page 3-41.
Min Copy Memory See “Min Copy Memory” on page 3-41.
Format Fax Storage See “Format Fax Storage” on page 3-42.
EVENT LOG See “EVENT LOG (Configuration Menu)” on page 3-42.
ADF Edge Erase See “ADF Edge Erase” on page 3-42.
FB Edge Erase See “FB Edge Erase” on page 3-42.
Paper Prompts See “Paper Prompts” on page 3-43.
Envelope Prompts See “Envelope Prompts” on page 3-43.
Jobs On Disk See “Jobs On Disk” on page 3-43.
Disk Encryption See “Disk Encryption” on page 3-43.
Wipe Disk See “Exiting Configuration Menu” on page 3-50.
Font Sharpening See “Font Sharpening” on page 3-48.
Require Standby See “Require Standby” on page 3-49.
Short edge Printing See “Short Edge Printing” on page 3-49.
Tray Low Message See “Tray Low Message” on page 3-49.
LES Application See “LES Applications” on page 3-49.
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-50
.
Key Repeat Rate See “Key Repeat Rate” on page 3-50.
To Next Page
Loading...
