Lexmark X945 - Paper Is Installed (Short Edge) in the Media Paper Tray; PC Cartridge End of Life

Diagnostic information 2-185
7510
Paper is installed (short edge) in the media paper tray
PC cartridge end of life
Step Check Yes No
1 Is the media installed (short edge) orientation in the media
tray assembly as opposed to long edge?
Turn media 90
degrees or enable
short edge feeding
which is found in
the config menu
(press select and
right arrow at
power on), and
then find the menu
item short edge
printing.
Go to step 2.
2
Perform a print test.
Does the error remain?
Replace the
printer engine card
assembly.
Go “Upper
printer engine
card assembly
removal” on
page 4-77.
Problem solved.
Step Check Yes No
1 Check the appropriate PC cartridge for proper installation.
Is the appropriate PC cartridge installed properly?
Go to step 2. Install the
appropriate PC
cartridge properly.
2
Check the appropriate PC cartridge for damage.
Does the appropriate PC cartridge appear damaged?
Replace the
appropriate PC
cartridge.
Go to step 3.
3
Check the developer interlock plate assembly for damage.
Is the above component damaged?
Replace the
developer
interlock plate
assembly.
Go to Go to
“Developer
interlock plate
assembly
removal” on
page 4-49.
Go to step 4.
4
Perform a print test.
Does the error continue?
Replace the upper
printer engine card
assembly.
Go to “Upper
printer engine
card assembly
removal” on
page 4-77.
Problem solved.