Lexmark X945 - 2000-Sheet Dual Input (TTM)-Sensor (Tray 4 Feed-Out) Removal

Repair information 4-181
7510
2000-sheet dual input (TTM)—sensor (tray 4 feed-out) removal
1. Remove the media tray 2 assembly.
2. Remove the tray module left cover. See “2000-sheet dual input (TTM)– tray module left cover removal” on
page 4-167.
3. Remove the TTM media tray 3 assembly. See “2000-sheet dual input (TTM)–TTM media tray 3 assembly
removal” on page 4-171.
4. Remove the TTM media tray 4 assembly. See “2000-sheet dual input (TTM)–TTM media tray 4 assembly
removal” on page 4-170.
5. Disconnect the connector from the sensor (tray 4 feed-out) (A).
6. Release the hooks securing the sensor (tray 4 feed-out) (A) to the upper guide (B).
7. Remove the sensor (tray 4 feed-out) (A).
Hook
A
Connector
B
Front