Lexmark X945 - Platen Cushion Removal

4-116 Service Manual
7510
Platen cushion removal
1. Open the ADF unit assembly.
2. Gently pull off the platen cushion (A) from the ADF.
Note: Before reinstalling the platen cushion (A), position the ADF in its upright position, and place the platen
cushion (A) on the large platen glass (B) flush with the left and top edges. Gently close the ADF to attach the
platen cushion (A) to the ADF.
A
A
Platen guide
0.5+/-0.2mm
0.5+/-0.2mm