Lexmark X945 - LVPS Card Assembly Removal

Repair information 4-87
7510
5V LVPS card assembly removal
1. Remove the rear cover assembly. See “Rear cover assembly removal” on page 4-5.
2. Remove the rear upper cooling fan bracket assembly. See “Rear upper cooling fan bracket assembly
removal” on page 4-102.
3. Remove the developer / transfer roll HVPS card assembly. See “Developer / transfer roll HVPS card
assembly removal” on page 4-103.
4. Remove the lower printer engine card bracket assembly. See “Lower printer engine card bracket assembly
removal” on page 4-79.
5. Remove the 5V HVPS card bracket assembly. See “5V LVPS card bracket assembly removal” on page 4-86.
6. Remove the four screws securing appropriate 5V LVPS card assembly (A) to the 5V HVPS card bracket
assembly.
7. Remove the appropriate 5V LVPS card assembly (A).