Index I-3
7510
842.01 scanner communication failure 2-111
842.02 scanner communication failure 2-112
842.03 scanner communication failure 2-112
842.04 scanner communication failure 2-113
842.10 scanner unit assembly - ADF communication
failure 2-113
842.11 scanner communication failure (by scanner)
2-114
842.12 scanner unit assembly communication failure
2-114
843.00 sensor (scanner HP) failure 2-115
843.01 scanner carriage over run failure 2-116
843.10 ADF RAM test failure 2-117
843.11 ADF EEPROM failure 2-117
843.12 ADF pick roll position lift up failure 2-117
843.20 scanner unit assembly connection failure 2-119
843.21 scanner unit assembly EEPROM failure 2-119
843.22 scanner unit assembly EEPROM sub system
failure 2-119
843.23 scanner cooling fan failure 2-120
843.24 image processing failure 2-121
843.25 scanner controller card assembly failure 2-121
843.26 scanner controller card assembly failure 2-122
844.00 exposure lamp error 2-122
844.01 white reference/exposure lamp illumination error
2-123
845.00 CCD error 2-124
845.01 CCD initialization (lamp on) error 2-125
845.02 CCD initialization (lamp off) error 2-126
846.00 scanner communication error 2-126
846.01 scanner communication error 2-127
846.10 sensor (ADF width APS X) error 2-127
846.12 scanner unit assembly software logic error
2-129
846.13 switch (platen interlock) open 2-129
847.00 modem error 2-130
847.01 fax storage error 2-130
848.00 Fax/modem configuration ID mismatch 2-131
849.00 hard drive/configuration ID mismatch 2-131
900.XX RIP card assembly software error 2-131
901.XX RIP card assembly software error 2-132,
2-134, 2-135, 2-136, 2-137, 2-138
903.00 K developer/transport drive assembly motor
error
2-140
903.01 K PC drive motor error 2-141
903.02 CMY PC drive motor error 2-142
903.03 developer drive motor error 2-142
904.00 NVM data failure 2-144
904.00 Sensor (transfer belt HP) late error 2-143
904.01 transfer belt position failure 2-144
904.02 Sensor (transfer belt edge) failure 2-145
904.03 sensor (2nd transfer roll retract HP) late error
2-145
904.04 sensor (2nd transfer roll retract HP) lag error
2-147
904.05 sensor (CMY transfer roll retract HP) late error
2-148
904.06 sensor (CMY transfer roll retract HP) lag error
2-148
904.07 CMY transfer roll retract motor time out 2-149
905.00 NVM read/write cannot be executed failure
2-149
905.01 marking device video error 2-149
905.02 marking device Xerographics error 2-150
905.03 marking device other1 error 2-150
905.04 marking device paper handling error 2-150
905.05 marking device other2 error 2-150
907.00 printhead polygon mirror motor error 2-151
907.01 SOS internal error 2-151
907.02 SOS internal error 2-151
907.03 SOS internal error 2-152
907.04 SOS internal error 2-152
907.05 printhead control error 2-153
908.00 waste toner full error 2-153
911.00 24V LVPS cooling fan error 2-154
911.01 transfer belt drive motor cooling fan error 2-154
911.02 fuser cooling fan lock error 2-155
918.00 standard media exit shift error 2-155
920.00 fuser main lamp overheat error 2-156
920.01 front thermistor disconnection error 2-156
920.01 magenta toner RFID communication error
2-161
920.02 fuser sub lamp overhead error 2-157
920.03 rear thermistor disconnection error 2-157
920.04 main lamp warm up error 2-158
920.05 main lamp on-time error 2-159
920.06 sub lamp warm-up failure 2-159
920.07 sub lamp on-time error 2-160
924.00 yellow toner RFID communication error 2-160
924.02 cyan toner RFID communication error 2-161
924.03 black toner RFID communication error 2-162
925.00 fsensor (C ATC) error 2-163
925.00 sensor (K ATC) error 2-164
925.00 sensor (M ATC) error 2-163
925.00 sensor (Y ATC) error 2-162
940.00 MPF tray 5 size sensing error 2-164
941.00 switch (media size) size sensing error (tray 1)
2-165
941.01 sensor (media level) late error (tray 1) 2-166
942.00 switch (media size) size sensing error (tray 2)
2-167
942.01 sensor (media level) late error (tray 2) 2-167
943.00 switch (media size) size sensing error (tray 3)
2-168
943.01 sensor (media level) late error (tray 3) 2-169
944.00 switch (media size) size sensing error (tray 4)
2-170
944.01 sensor (media level) late error (tray 4) 2-171
950.00 through 950.29 EPROM mismatch failure 2-172
950.30 through 950.60 EPROM mismatch failure 2-173
951.XX RIP card assembly NVRAM failure 2-174
952.XX Interconnect card NVRAM CRC failure 2-174
953.XX operator panel assembly NVRAM failure 2-175
954.XX interconnect card assembly NVRAM failure
2-175
955.XX RIP card assembly NAND CRC failure 2-176
956.00 RIP card assembly processor failure 2-176
956.01 RIP card assembly processor over temperature
To Next Page
Loading...
