I-6 Service Manual
7510
drive motor assembly 4-203, 4-205, 4-230, 4-231,
4-252
feed roll 4-193, 4-222, 4-244
feed roll one-way clutch 4-194, 4-223, 4-245
foot cover 4-165
front cable assembly 4-174
left cover 4-167
media feed lift motor 4-186, 4-217, 4-239
media feed unit assembly (tray 3) 4-183, 4-213, 4-215
media feed unit assembly (tray 4) 4-179, 4-209, 4-236
media feed unit drive gear 13 tooth 4-190, 4-219,
4-241
media feed unit drive gear 28/21T 4-193, 4-222, 4-244
media feed unit drive gear 29T 4-193, 4-222, 4-244
media guide rack and pinion 4-175
media out actuator 4-190, 4-219, 4-241
media transport roll assembly 4-185, 4-239
one-way 22T 4-195, 4-224, 4-246
one-way clutch/gear assembly 4-188, 4-218, 4-239
pick roll 4-199, 4-228, 4-249
pick roll idler gear 33T 4-199, 4-228, 4-249
rear cover 4-167
right cover 4-166
sensor (media level) 4-191, 4-220, 4-242
sensor (media out) 4-192, 4-221, 4-243
sensor (tray 3 feed-out) 4-185, 4-216
sensor (tray 4 feed-out) 4-181, 4-210, 4-237
separation roll 4-197, 4-226, 4-248
separation roll one-way friction clutch 4-196, 4-225,
4-247
switch (2TM/TTM left door interlock) 4-201, 4-229,
4-251
switch (TTM media size) 4-182, 4-183, 4-212, 4-238
top cover 4-165
tray 3 assembly 4-171
tray 3 front cover 4-171
tray 3 lift gear assembly 4-202
tray 3 media guide lock assembly 4-175
tray 4 assembly 4-170
tray 4 front cables 4-113, 4-178
tray 4 front cover 4-175
tray 4 lift gear assembly 4-202
tray 4 media guide lock assembly 4-179
tray 4 media guide rack and pinion 4-179
tray 4 rear cables 4-175
tray 4 transport assembly 4-175
tray support roll 4-168
removals–3X 500-sheet drawer (3TM)
top cover
4-206, 4-207, 4-208, 4-209, 4-232, 4-233,
4-234, 4-235, 4-236
removals–ADF
actuator/media guide assembly
4-152
ADF controller card assembly 4-138
ADF exit roll assembly 4-156
ADF feed drive motor assembly 4-134
ADF feed/pick roll assembly 4-142
ADF feed-out roll assembly 4-153
ADF front cover assembly 4-131
ADF left cover assembly 4-132
ADF left cover media guide 4-144
ADF media feed assembly 4-135
ADF rear cover 4-131
ADF registration motor 4-159
ADF registration roll assembly 4-152
ADF separation roll guide assembly 4-155
ADF transport roll assembly 4-157
ADF unit assembly 4-129
document set actuator 4-143
document set LED 4-140
document tray assembly 4-137
inverter gate 4-152
inverter solenoid assembly 4-139
left cover pinch roll assembly 4-134
media scan guide 4-135
pick roll position motor assembly 4-144
platen cushion 4-116, 4-130
sensor (ADF inverter) 4-151
sensor (ADF pre-registration) 4-150
sensor (ADF registration) 4-149
sensor (ADF width APS 1) 4-146
sensor (ADF width APS 2) 4-147
sensor (ADF width APS 3) 4-148
sensor (document set) 4-157
sensor (document tray length 1) 4-163
sensor (document tray length 2) 4-164
sensor (document tray width 1) 4-160
sensor (document tray width 2) 4-161
sensor (document tray width 3) 4-162
sensor (pick roll position HP) 4-141
sensor (sheet through) 4-158
sheet through actuator 4-140
switch (ADF left cover interlock) 4-145
removals–scanner
ADF angle actuator assembly 4-125
CCD card/lens assembly 4-119
exposure lamp 4-122
exposure lamp PS card assembly 4-122
large platen glass 4-117
operator panel assembly 4-119
scanner controller card assembly 4-123
scanner drive motor assembly 4-121
scanner left cover 4-117
scanner right cover 4-118
sensor (ADF angle) 4-125
sensor (scanner HP) 4-124
right arrow button 2-9
right scroll increase button 2-8
S
safety information ii-xxvii
safety inspection guide 6-1
scheduled maintenance 6-3
select button 2-8
Service checks 2-39
size and weight - without finisher 1-1
specifications 1-1
Start button 2-4
status message bar 2-5
Stop button 2-4
To Next Page
Loading...
