Installation/Owner's Manual
8-2
Accumulative operating time is the function that calculates the operating time of the indoor unit for a
specific period selected by the user.
When you press the accumulative operating time tab, the following screen will be displayed.
You can set the search condition and
target of the accumulative operating time.
You can set the
period to search the
accumulative
operating time of the
indoor unit.
You can view the total operating time and statistical
information of the indoor unit within the search period.
You can reset the accumulative operating time information.
You can save the accumulative operating time as a file.
The accumulative
operating time
information is
refreshed with the
latest information
for viewing.
❈ [Reset] button is only activated when logged in as installation expert.
The following information of accumulative time operation is displayed in table format.
Item Description
Name of target to search the accumulative operating time is displayed. This is displayed
in applicable Zone, Group or Indoor unit according to the condition setting.
Total operating time of the target set for the period is displayed.
Indoor unit operating time, percentage and average indoor temperature for the set
period will be displayed.
• Operating time: Indoor unit operating time for the set period is displayed.
• Percentage: Operating time percentage of each unit/group/zone set during the period.
The sum of the percentage of unit/group/zone must be 100%.
• Average indoor temperature: Average indoor temperature detected from the indoor unit
in the set period is displayed.
Unit name
Statistics by period
Total operating time
Accumulative operating time
8. Statistical menu
To Next Page
Loading...
Need help?
General
