LG V-NET AC Smart II Advanced Control Smart User Manual

Installation/Owner's Manual
4-16
4. AC Smart II Menu
Control/Monitoring
This section describes how to operate the AC Smart function in order by using the control/monitoring
menu.
The function of the unit to control is as follows.
• Indoor temperature setting of unit
• Operating and stopping the unit
• Operating mode of the unit
• Fan level of the unit
• Lock function of the unit
• Indoor cooling/heating temperature and hot water temperature of AWHP unit
To set the function of the unit, proceed according to the following description.
1. Select 'Control/Monitoring' menu from the menu of AC Smart. When you select the
'Control/Monitoring' menu, the following Control/Monitoring screen is displayed.
Designate the target to execute the various function of the unit from the screen with zone, group or
unit displayed.
You can press the [Up], [All Zones], [All Groups] or [All Units] button to designate the target to move
or control.
Controlling the unit
Reference: Detail unit control
if you need to set the detail function, refer to Controlling the unit in detail in the next section.
Use this when moving Zone,
Group or Unit
Double click to move
to the lower level

LG V-NET AC Smart II Advanced Control Smart Specifications

General

Brand	LG
Model	V-NET AC Smart II Advanced Control Smart
Category	Air Conditioner
Language	English