1. AC SMART II Introduction
Installation/Owner's Manual
1-6
AC Smart II product specifications
The product specifications of AC Smart are as follows.
Item Specifications
CPU
Memory
Boot ROM & Storage
LCD
Speaker
Button Key
DI
Power
Touch Screen
UART
USB
OS
MP2530F(or MP2531F)
- Dual CPU[ARM926E/360MHz + ARM946E/300MHz
128MB [DDR 64MB(A Bank) + DDR 64MB(B Bank)]
512MB (NAND Flash)
SD Card (support SDHC 8GB) (For optional card)
7.0” WVGA (800*480) TFT LCD
AST-01508MR-R
Display S/W(x1), Software Key S/W(x1)
S/W Input (For Fire-sensor)
DC 12V/1A
4 Wire, Touch Controller built-In.
RS-485 1Port
USB1.1 Host 2Port(For service)
USB2.0 Device 1Port (For development)
Windows CE 5.0 Core License
To Next Page
Loading...
