AC Smart
9-38
Editing registered unit
You can change the unit information connected and registered to AC Smart. To change the unit
information, proceed in the following order.
1. Select the 'System' menu from the menu of AC Smart. When you select the 'System' menu, the
following screen is displayed. Click on the [Unit Reg.] located on the right side of the screen.
Click on [Unit Reg.] button
2. 'Edit unit' screen is displayed. Select the unit to change the information of from the unit list. Change
the information of the selected unit. Refer to the following chart for the information entered.
After selecting the unit to edit,
Change the information
9. System Menu
To Next Page
Loading...
