AC Smart
8-3
Searching accumulative operating time
You can check the accumulative operating time of the indoor unit during the specific period. To check
the accumulative operating time, proceed as follows.
1. Press the ʻAccumulative operating timeʼ tab from the statistical menu and set the period to search
the accumulative operating time from the ʻPeriodʼ item. Press the button to select the dates.
And then press the [Refresh] button.
Set the period to search for the accumulative
operating time and press the [Refresh] button.
2. The following information about the accumulative operating time is displayed.
8. Statistical menu
To Next Page
Loading...
Need help?
General
