AC Smart
9-4
3. AC SMART II will search and register the units connected. When this process is completed, units
automatically registered will be displayed in the table located below the screen.
After the unit is searched,
the result is displayed.
4. Temporarily save the searched unit. When you press the [OK] button, the ʻOKʼ screen to confirm to
save will be displayed. Press the [Yes] button to save and return to the previous screen.
Press the [OK]
button to save and
when the "OK"
screen is
displayed, press
the [Yes] button.
9. System Menu
To Next Page
Loading...
