Installation/Owner's Manual
9-27
3. Click on the [Save] button to save the setting. Message confirming to save will be displayed on
screen. Click on the [Yes] button.
After clicking on [Save] button, when "Information"
screen is displayed, click on [Yes] button
4. After the setting process is displayed on the screen, the save complete message is displayed.
When you click on the [OK] button, the save process will be completed. The unit included in the
deleted group is moved to the 'Unregistered unit'.
When you click on [OK] button, the saving is
completed. Can check the unit included in
deleted group in "Unregistered unit"
9. System Menu
To Next Page
Loading...
Need help?
General
