L-IP User Manual 14 LOYTEC
Version 6.1 LOYTEC electronics GmbH
be authenticated by an MD5 checksum and time stamps. Besides its primary router
operation, the L-IP Router is a powerful network diagnostics device. Its simple and intuitive
user interface provides an immediate overview over the network status. Both the IP-852
channel and CEA-709 network can be observed with status LEDs. For trouble-shooting, the
Router supports the remote LPA (LOYTEC Protocol Analyzer) functionality so that the
network can be analyzed from any PC connected to the Internet. With the L-IP Redundant
CEA-709/IP Router, setting up a redundant network which is comfortable to maintain
becomes an easy task.
The L-IP Redundant is used for:
Creating redundant CEA-709 network infrastructure
Monitoring a TP/FT-10 channel (ring structure) on cable break
Ensuring communication on the TP/FT-10 channel in case of a single cable break
Monitoring health state of nodes in a CEA-709 network
Determine location of a cable break
Full redundancy with two L-IP Redundant CEA-709/IP Router in parallel for the IP-
Cannel and the CEA-709 channel
Device redundancy by mutual monitoring of paired Redundant L-IPs
Messages and alarming via SNVTs and LonMark-Alarming via Node Object
Figure 2: Using L IP Redundant with redundant ring structure and device redundancy
To Next Page
Loading...