L-IP User Manual 50 LOYTEC
Version 6.1 LOYTEC electronics GmbH
d - Delete device
Select this menu item to delete a CEA-852 device on the IP-852 channel. The L-IP prompts
the device number which shall be deleted. A list of available CEA-852 devices is displayed
with the menu item [l].
n - Enable/Disable device
Select this menu option to enable or disable a CEA-852 device on the IP-852 channel. An
enabled device can be disabled and a disabled device can be enabled. The L-IP prompts the
device number which shall be enabled/disabled. A list of available CEA-852 devices with
their current status is displayed with the menu item [l]. Disabled members are temporarily
removed from the IP-852 channel and do not receive messages.
s - Show device statistics
Select this menu item to display statistics information for the client devices. The L-IP
prompts the device number which shall be examined. This number can be found in the
Channel Member List. Please note that this feature allows extracting the statistics
information from remote client devices over the IP-852 channel.
l - List channel members
Select this menu item to list all IP-852 channel members.
List of channel members
=======================
No Name IP Address Status Flags
--------------------------------------------------------------------------
000 local 80.125.123.100:1628 registered
--------------------------------------------------------------------------
NAT Router 80.168.1.250
+ 001 lipnat1 10.0.2.3:1628 registered
+ 002 lipnat1 10.0.2.4:1630 registered
--------------------------------------------------------------------------
003 sony 80.168.1.135:1628 registered
004 lip2 80.168.1.251:1628 disabled X
005 lpa-ip 80.168.1.215:1628 registered A
--------------------------------------------------------------------------
Press <RETURN> to continue
Figure 40: List all IP-852 channel members.
The list shows the list entry number, the device name, the IP address and the current status
of this device. Note that the first entry is always the local device, which is the CEA-852
device built into the configuration server. Devices behind a NAT router are listed in a tree
view style. The A-flag indicates that this device is an auto member. The X-flag indicates
that the device got disabled because it does not support the extended NAT mode (e.g. pre
3.0 L-IP or i.LON 1000). If the channel mode falls back to standard, these devices are
enabled again.
To Next Page
Loading...
Need help?
General