LSIS sv-ig5a User Manual

4-11
 Frequency setting
When changing run frequency to 30.05 Hz in Drive group
Drive group
1
-. In “0.00”, press the Ent () key once.
2
-. The second decimal 0 becomes active.
-. Press the UP () key until 5 is displayed.
3
-. Press the Left () key once.
4
-. The first decimal 0 becomes active.
-. Press the Left () key once.
5
-. Press the Left () key once.
6
-. Set 3 using UP () key.
7
-. Press the Ent () key.
-. 30.05 is blinking.
-. Press the Ent () key.
8
-. 30.05 is entered into memory.
 SV-iG5A display can be extended to 5 digits using left ()/right () keys.
 Parameter setting is disabled when pressing other than Enter Key in step 7.
For Service Call 800-848-2504
For Service Call 800-848-2504

LSIS sv-ig5a Specifications

General

Brand	LSIS
Model	sv-ig5a
Category	Inverter
Language	English