LSIS XBF-AD04A User Manual

Chapter 13 Analog Input Module (XBF-AD04C)
4) Setting filter constant
(1) When the filter constant is specified with 0, the filter will not be operated.
(2) If the filter constant is not specified with anything, it can't filter and it will be handled in 0.
Channel 0 filter constant (0 o
r 4 ~ 64000 ms)
Channel 1 filter constant(0 or 4 ~ 64000 m
s)
Address
No. 5
Channel 2 filter constant(0 o
r 4 ~ 64000 ms)
Address
No. 6
Channel 3 filter constant(0 o
r 4 ~ 64000 ms)
Address
No. 7
Address
No. 4
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Bit 15
Bit 14
Bit 13
Bit 12
Bit 11 Bit 10 Bit 9
Bit 8
Bit 7
Bit 6
5) Setting average process method
(1) When setting average process, the average process method is selected among
time average, number of averages, moving average.
(2) If setting average process is not specified, all channels will not handle the average
process.
Designation of average processing method(2bit per channel)
0 : Sampling processing
1 : Time average processing
2 : Average of number of rocessing
C
h
a
n
n
e
l
1
C
h
a
n
n
e
l
0
C
h
a
n
n
e
l
3
C
h
a
n
n
e
l
2
--
-- ----
Address
No. 12
Bit 5 Bit 4 Bit 3 Bit 2 Bit 1
Bit 0
Bit 15
Bit 14 Bit 13 Bit 12 Bit 11
Bit 10
Bit 9
Bit 8 Bit 7 Bit 6
6) Setting average value
(1) The average value is set depending on setting area of average process method.
(2) When the average value is out of the setting area, the average process will not be made.
Channel 0 average value
Channel 1 average value
Input channel average value setting
Time average : 4 ~ 16000 [ms]
Number of average : 2 ~ 64000 [times]
Channel 2 average value
Channel 3 average value
Address
No. 13
Bit 5 Bit 4
Bit 3
Bit 2 Bit 1
Bit 0Bit 15
Bit 14 Bit 13
Bit 12 Bit 11
Bit 10 Bit 9
Bit 8
Bit 7 Bit 6
Address
No. 14
Address
No. 15
Address
No. 16
13 - 41

LSIS XBF-AD04A Specifications

General

Brand	LSIS
Model	XBF-AD04A
Category	Controller
Language	English