Lucent Technologies CBX 500 - Page 30

xxx1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Contents
Beta Draft Confidential
List of Tables
Table 2-1. ATM UNI Signaling 4.0 Support ....................................................2-4
Table 2-2. Logical Ports and ILMI Settings......................................................2-5
Table 2-3. Number of Valid Bits in VPI/VCI for CBX 500 or CBX 3500.....2-14
Table 2-4. Number of Valid Bits in VPI/VCI for GX 550..............................2-15
Table 2-5. Physical and Logical Port Bandwidth Conversions.......................2-17
Table 2-6. Non-disruptive Logical Port and Trunk Attributes........................2-25
Table 3-1. Defining a Logical Port ...................................................................3-9
Table 3-2. Add Logical Port: General Tab Fields...........................................3-16
Table 3-3. Add Logical Port: Administrative Tab Fields ...............................3-21
Table 3-4. Add Logical Port: ATM Tab Fields...............................................3-29
Table 3-5. Add Logical Port: ILMI/OAM Tab Fields ....................................3-35
Table 3-6. Add Logical Port: CES Parameters Tab Fields .............................3-38
Table 3-7. Add Logical Port: VPI Range Tab Fields......................................3-46
Table 3-8. Default QoS Values for ATM UNI Logical Ports.........................3-51
Table 3-9. Add Logical Port: QoS Tab Fields ................................................3-53
Table 3-10. Add Logical Port: PNNI and NTM Tabs.......................................3-57
Table 4-1. I/O Modules for ATM Services.......................................................4-7
Table 4-2. Maximum Mono-Class Service Thresholds per Card Type............4-9
Table 4-3. Maximum Multi-Class Service Thresholds per
Card Type ........................................................................................4-9
Table 4-4. Add Logical Port Tabs...................................................................4-11
Table 4-5. Configuring ATM Logical Port Types..........................................4-14
Table 4-6. Add Logical Port: General Tab Fields...........................................4-16
Table 4-7. Add Logical Port: Administrative Tab Fields ...............................4-19
Table 4-8. Configuring UNI DCE/DTE Attributes.........................................4-20
Table 4-9. Add Logical Port: ATM Tab Fields...............................................4-22
Table 4-10. Add Logical Port: ILMI/OAM Tab Fields ....................................4-26
Table 4-11. Add Logical Port: Congestion Control Tab Fields........................4-29
Table 4-12. Add Logical Port: Trap Control Tab Fields...................................4-32
Table 4-13. Add Logical Port: Priority Frame Tab Fields................................4-34
Table 4-14. Select Traffic Shaper Dialog Box Fields.......................................4-38
Table 4-16. Configuring OPTimum Frame Trunk Attributes...........................4-41
Table 4-18. Add Logical Port: Link Management Tab Fields..........................4-43
Table 4-19. Add Logical Port: Discard/Congestion Mapping Tab Fields........4-48
Table 4-20. Add Logical Port: VPI Range Tab Fields......................................4-50
Table 5-1. Cell Scheduling..............................................................................5-15
Table 6-1. Modify Card: ATM Flow Control Processor Tab Fields.................6-4
Table 6-2. Add Logical Port: ATM FCP Tab Fields ......................................6-11
Table 7-1. Fast APS Support.............................................................................7-7
Table 7-2. Slow APS Support...........................................................................7-9
Table 7-3. Add Trunk: Administrative Tab Fields..........................................7-22
Table 7-4. Add Trunk: Primary Options Tab Fields.......................................7-26
Table 7-5. PPort Redundancy Options............................................................7-31
Table 7-6. Configuring an ATM NNI Logical Port........................................7-37