Beta Draft Confidential
Configuring Layer 2 VPNs
Configuring a PVC for Layer 2 VPN
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0513-9
Configuring a PVC for Layer 2 VPN
When you configure a PVC for Layer 2 VPN, first specify the network overflow
attribute (see Table 10-3 on page 10-17). This parameter determines whether the PVC
is restricted to trunks of its own Layer 2 VPN, or can use public (shared) trunks during
overflow conditions.
After you configure a PVC, use the following steps to dedicate it to a VPN:
1. Right-click on the instance node of the PVC to which you want to assign a Layer
2 VPN and customer name.
2. Select L2 VPN/Customer Info from the pop-up menu. The Choose VPN/Policy
dialog box appears (see Figure 13-5 on page 13-7).
3. In the Customer Name field, select the customer name you want to assign to this
circuit.
4. In the VPN/Policy Name field, select the VPN or policy name you want to assign
to this circuit.
5. Choose OK.
To Next Page
Loading...
