Lucent Technologies CBX 500 - Figure 16-7. State of Connection SETUP Message Address Elements (3)

Beta Draft Confidential
16-161/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
About SVCs
About Address Translation
Figure 16-7. State of Connection SETUP Message Address Elements (3)
Figure 16-8. State of Connection SETUP Message Address Elements (4)
Example 3
- Replace option selected on egress port of Network 1
Private
Network
Node
Public
ATM
Network
Address
X
A
AB
null
null
XB
null
null
XB
null
null
- Local Gateway address X configured to a prefix on Network 1’s egress
port, and the prefix corresponds to B
Network
1
B
Example 4
- Replace option selected on egress port of Network 1
Private
Network
Node
Public
ATM
Network
Address
X
A
AB
null
null
XY
null
null
XY
null
null
- Local Gateway address X configured to a prefix on Network 1’s egress
port, and the prefix corresponds to B
Network
1
- Remote Gateway address Y configured to a prefix on Network 1’s egress
port, and the prefix corresponds to B
B is configured as
an alias for Y
Y