Lucent Technologies CBX 500 - Appendix H Customer Names; Adding Customer Names

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 H-1
Beta Draft Confidential
H
Customer Names
This appendix provides guidelines for using Customer Names, an optional software
feature that enables network providers to assign Frame Relay logical ports to a
specific customer so that they can then use the customer name as a filter when viewing
logical ports.
This appendix contains:
• “Adding Customer Names” on page H-1
• “Associating a Logical Port With a Customer Name” on page H-3
• “Using the Layer2 Customer/VPN View Feature” on page H-4
You can configure the Customer Names feature with or without the use of a virtual
private network (VPN). For more information on using Customer Names with VPNs,
see Chapter 13, “Configuring Layer 2 VPNs.”
Adding Customer Names
To add customer names:
1. In the Networks tab, expand the network you are managing.
2. Expand the VNN Customers node.
3. Right-click on the VNN Customers node and select Add from the pop-up menu,
as shown in Figure H-1.