15-61/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring RLMI
Creating Service Names
Beta Draft Confidential
2. Expand the node for the logical port for which you want to create a service name.
You can create RLMI service names only on DTE or NNI logical ports configured
with RLMI enabled and the Can Backup Service Names field set to No.
3. Right-click on the Service Names node and click Add on the pop-up menu, as
shown in Figure 15-1.
Figure 15-1. Adding a Service Name
To Next Page
Loading...
