Lucent Technologies CBX 500 - Figure 10-19. Select Endpoint Dialog Box

Beta Draft Confidential
Configuring ATM PVCs
Configuring PMP Circuits
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0510-73
Figure 10-19. Select Endpoint Dialog Box
2. Select the PMP root endpoint by using either of the following procedures:
• “Selecting an Endpoint From a Switch” on page 10-74.
• “Selecting an Endpoint From a Physical Port” on page 10-75.