Lucent Technologies CBX 500 - Configuring Redirect PVC Parameters

Beta Draft Confidential
Configuring ATM PVCs
About Redirect PVCs
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0510-37
Configuring Redirect PVC Parameters
To configure redirect circuit parameters, you enter information in each of several tabs,
categorized by parameter type. Redirect PVCs use the tabs listed in Table 10-7.
Table 10-7. Tabs Required for Configuring Redirect PVC Parameters
Circuit Type Tabs Required
Frame Relay to Frame Relay Administrative
Traffic Type
User Preference
Accounting
Frame Relay to ATM-on-Cell Administrative
Traffic Type
User Preference
NDC
Accounting
Frame Relay to ATM-on-Frame Administrative
Traffic Type
User Preference
Accounting
ATM-on-Cell to ATM-on-Cell Administrative
Traffic Type
User Preference
Traffic Mgmt.
NDC
Accounting
ATM-on-Cell to ATM-on-Frame Administrative
Traffic Type
User Preference
NDC
Accounting
ATM-on-Frame to ATM-on-Frame Administrative
Traffic Type
User Preference