Lucent Technologies CBX 500 - Figure 8-14. Add Logical Port: Qos Tab

To Next Page

To Previous Page

Beta Draft Confidential

8-281/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring ATM Over MPLS Trunks

Configuring Feeder Logical Ports

QoS Tab

When configuring Bandwidth Allocation settings for feeder logical ports, the

Dynamic option is enabled by default, with 0% values. The QoS tab in the Add

Logical Port dialog box is shown in Figure 8-14.

Figure 8-14. Add Logical Port: QoS Tab

For ATMoMPLS UNI/NNI feeder logical ports, you can configure the fields in the

QoS tab as described in Table 8-7.

Table 8-7. Add Logical Port: QoS Tab Fields

Column Action/Description

Class For each row in the table, this column displays the QoS class to

which settings in other columns relate.

Other manuals for Lucent Technologies CBX 500