Beta Draft Confidential
Configuring ATM Over MPLS Gateway Solution on CBX 3500
Network-wide MPLS Settings
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/059-15
7. When you complete the configuration, choose OK to save the changes and close
the dialog box.
E-LSP NUM PHB0
E-LSP NUM PHB1
E-LSP NUM PHB2
E-LSP NUM PHB3
E-LSP NUM PHB4
E-LSP NUM PHB5
E-LSP NUM PHB6
E-LSP NUM PHB7
Based on the number in the E-LSP NUM PHB field,
configure each PHB in this field. Each PHBID must be
mapped to a DiffServ forwarding class, which is then
mapped to an EXP bit on the switch. Select from the
following options:
• DF-Drop Precedence0 – typically used for UBR/ABR
with CLP 0
• DF-Drop Precedence1 – typically used for UBR/ABR
with CLP 1
• AF1-Drop Precedence0 – typically used for VBR-Nrt
with CLP 0
• AF1-Drop Precedence1 – typically used for VBR-Nrt
with CLP 1
• AF2-Drop Precedence0 – typically used for VBR-RT
with CLP 0
• AF2-Drop Precedence1 – typically used for VBR-RT
with CLP 1
• EF-Drop Precedence0 – typically used for CBR with
CLP 0
• EF-Drop Precedence1 – typically used for CBR with
CLP 1
Table 9-4. Add DiffServ Dialog Box Fields (Continued)
Field Description
To Next Page
Loading...
