Beta Draft Confidential
10-581/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM PVCs
Configuring Frame Relay-to-ATM Interworking Circuits
Traffic 
Descriptor Type
Select one of the following TD options from the pull-down list:
PCR CLP=0 (cells/sec) – Displays only if you selected a TD 
combination that includes PCR CLP=0. If so, specify the PCR in cells 
per second (CPS) for high-priority traffic (that is, the CLP=0 cell 
stream).
PCR CLP=0+1 (cells/sec) – Specify the PCR in CPS for the combined 
high- and low-priority traffic (that is, the CLP=0+1 aggregate cell 
stream).
SCR CLP=0 (cells/sec) – Displays only if you selected a TD 
combination that includes SCR CLP=0. If so, specify the SCR in CPS 
for the combined high-priority traffic (that is, the CLP=0 cell stream).
SCR CLP=0+1 (cells/sec) – Displays only if you selected a TD 
combination that includes SCR CLP=0+1. If so, specify the SCR in CPS 
for the combined high- and low-priority traffic (that is, the CLP=0+1 
aggregate cell stream).
MBS CLP=0 (cells) – Displays only if you selected a TD combination 
that includes MBS CLP=0. If so, specify the MBS in CPS for the 
combined high-priority traffic (that is, the CLP=0 cell stream).
MBS CLP=0+1 (cells) – Displays only if you selected a TD combination 
that includes MBS CLP=0+1. If so, specify the MBS in CPS for the 
combined high- and low-priority traffic (that is, the CLP=0+1 cell 
stream).
MCR CLP=0 (cells/sec) – Displays only if you selected a TD 
combination that includes MCR CLP=0. If so, specify the MCR in CPS 
for the combined high-priority traffic (that is, the CLP=0 cell stream).
Note: While the MCR TD is only applicable to a CBX 500 with an FCP, 
this attribute is offered as a selection on non-CBX endpoints. This is 
because even though one or both endpoints may not be on a CBX with 
FCP, the PVC might traverse a CBX 500 FCP trunk. In this case, the 
provisioned attribute is used.
Table 10-12. Add PVC: Traffic Type Tab Fields (Continued)
Field Action/Description