Lucent Technologies MAX TNT - Figure B-5 RJ-48 C;Bantam Straight-Through Cable; Table B-7 RJ-48 C;Bantam Straight-Through Cable Specifications

B-8 MAX TNT Hardware Installation Guide
Cabling and Connector Specifications
T1/PRI interface specifications
T1/PRI straight-through cable: RJ-48C/Bantam
The WAN side of the RJ-48C/Bantam straight-through cable connects to dual bantam jacks.
Table B-7 and Figure B-5 show the pinouts.
Figure B-5. RJ-48C/Bantam straight-through cable
Table B-7. RJ-48C/Bantam straight-through cable specifications
Pair # Signal Male RJ-48 Male Dual 310-P
1 Receive 1
2
Tip 1
Ring 1
2Transmit5
4
Tip 2
Ring 2
1 RECEIVE
2 RECEIVE
4 TRANSMIT
5 TRANSMIT
TIP 1 RECEIVE
RING 1 RECEIVE
TIP 2 TRANSMIT
RING 2 TRANSMIT
Male RJ-48CMale Dual 310-P