Lucent Technologies MAX TNT - Index

MAX TNT Hardware Installation Guide Index-1
Index
A
ADSL card
cabling specifications
, B-25
alarm relay
specifications
, C-3
specifications for wire connecting to
, C-3
AUI
Ethernet specifications
, B-2
specifications
, B-2
B
bantam jacks
cables for
, B-8
monitoring T1 line with
, A-30
battery specifications
, C-1
booting
checking flash card after
, 3-14
MAX TNT
, 3-14
C
cables
for ADSL
, B-25
for E1 lines
, A-9
for IDSL
, B-20
RS-449
, B-17
SDSL
, B-27
serial WAN card
, A-28
serial WAN, V.35
, B-18
T1/PRI bantam
, B-8
T1/PRI crossover, RJ-48C/RJ-48C
, B-4
T1/PRI RJ-48C/DB-15 crossover
, B-7
T1/PRI specifications
, B-4
T1/PRI straight-through
, B-5, B-6
T3 card
, A-4, A-33
V. 35
, B-15
configuration
accessing configuration interface through serial cable
,
3-11
connections
redundant T3
, A-33
connectors
E1/PRI specifications
, B-10
T1/PRI specifications
, B-9
cooling, requirements for
, 3-1
CSU
line compatibility
, B-3
requirements
, B-3
D
DPNSS
connecting to access point
, A-9
DS3-ATM card
connecting redundant cards
, A-5
connecting to WAN
, A-4
specifications
, A-2
status lights
, A-4
DS3-ATM2 card
, A-5
connecting redundant cards
, A-6
connecting to WAN
, A-6
illustration
, A-6
specifications
, A-5
status lights
, A-5
DSLTNT
features overview
, 1-3
E
E1 card
specifications
, A-8
E1 lines
connecting to the WAN
, A-9
DPNSS access point
, A-9
grounding
, A-9
maximum distance to WAN interface equipment
, A-9
monitoring with bantam jacks
, A-10
using proper cabling
, A-9
E3 lines
connecting to the WAN
, A-13
E3-ATM card
indicators
, A-12
redundant connection
, A-13
specifications
, A-11
electronic specification
, C-1