BA053101-en
Pos: 125 /Tech nische D okumen tation/A lle G eräte/ Überschr iften/Üb ers chrifte n 1.1/M/ Über schrif t 1.1: Me sspr ogramm e @ 13\mod_1234259459658_75.docx @ 336893 @ 2 @ 1
Pos: 126 /Te chnis che D okum ent ati on/ Leis tun gsm esst ech nik/ POWE R DYN O/0 523 01 LPS 3 000 R10 0/B A/I nhal t: 052 3 Mess pr ogr amme @ 13\ mod_1234259499194_75.docx @ 336939 @ @ 1
This dynamometer provides an exact simulation of defined road load conditions.
Fuel consumption measurement and exhaust analysis, as well as serial monitoring of vehicles can
be carried out.
The following operation modes can be selected for conducting the various measurement tasks:
•
The user can pre-select from various load conditions which make possible the determination of
e.g. a specific engine diagnosis or vehicle climbing power. Depending upon need, various load
conditions can be simulated such as constant traction, a constant speed, a constant RPM or a
driving simulation.
•
Use this menu item to determine the vehicle’s engine power (continuous and discrete
measurement).
•
Extrapolation of the Engine Power (Optional)
Extrapolation of the engine power based on DIN 70020, EWG 80/1269, ISO 1585, JIS D 1001,
SAE J 1349.
•
The engine flexibility can be checked using this menu item. Once the flexibility test has been called
up the vehicle weight and road load must be entered as in the road load simulation test.
•
The vehicle’s speedometer can be tested using this menu item. The speed can be tested as well.
•
Road Load Adaption (Optional)
Various dyno coefficients can be determined using this menu item. The iterative coefficient
adaption can be done based on ECE or SAE J2264 standard.
•
Use this menu item to do a diesel exhaust measurement under full load.
Pos: 127 /-----F ormat- ----/MA NUELLE R UMBR UCH Seitenum bruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
To Next Page
Loading...
Need help?
General
