Maintenance overview
5.2 Maintenance plans
16.11.2018
Maintenance manual 3 302 756 en 5 - 3
GMK6400
5.2 Maintenance plans
The descriptions for certain maintenance work for the maintenance
plans D, W, M 1 to M 12 and Y 2 to Y 10 are provided for
– the carrier in Chapter 7 and for
– the superstructure in Chapter 8.
References (chapter and page number) to the description of this mainte-
nance work can be found after the respective maintenance work for carrier
and superstructure.
The section titles
–of Chapter 7 Maintenance work on the carrier and
–of Chapter 8 Maintenance work on the superstructure
contain the abbreviation (D to Y 10) of the relevant maintenance plan for
better comprehension.
In addition to the Maintenance work on the carrier and the Maintenance
work on the superstructure Chapter 6 also lists the Lubricants and
consumables:
– The designations of the oils/lubricants in accordance with Lubricants list,
p. 6 - 2.
– The amounts as approximate values for oil amounts in litres (l) (and US
gallons (gal)) (the exact oil amounts can always be determined by the oil
level inspection holes, the oil dipsticks or the oil level indicators)
Lubricant
applications list, p. 6 - 3.
H
Items that are only available with additional equipment are designated
accordingly in
Chapter 7 and Chapter 8.
Maintenance work on the engines over and above the daily and weekly
checks is only partially described in this maintenance manual! When
carrying out such maintenance work, follow the instructions given in the
accompanying
Engine manufacturer's documentation.
To Next Page
Loading...
Need help?
General
