S
ection
6
S
ection
7
any of the software screens.
11. Tap OK to acknowledge that the settings were saved to DVR2000E memory.
Reading Settings from the DVR2000E
DVR2000E settings are read into the software on your handheld by performing the following steps.
1. On the software Main Screen, tap the down arrow (6) on the Other Pages: line.
2. Select File Operations from the drop-down menu and then tap the Open button in the Which Settings?
dialog box to access the File Operations Screen.
3. Tap the down arrow (6) on the File Actions: line and then select READ from DVR2000E from the drop-
down menu.
4. Ensure that the proper data cable is connected between the DVR2000E and the handheld.
5. Tap the OK button in the Connect Cable dialog box to read the DVR2000E settings into the software.
6. Once the settings are read, tap the OK button to acknowledge that the DVR2000E settings were read
into the software.
Deleting User-Created Settings Files
Perform the following steps to delete a user-created settings le.
1. On the software Main Screen, tap the down arrow (6) on the Other Pages: line.
2. Select File Operations from the drop-down menu and then tap the Open button in the Which Settings?
dialog box to access the File Operations Screen.
3. Tap the down arrow (6) on the File Actions: line and then select Delete saved le.
4. Tap the name of the settings le that to be deleted.
5. Tap the Delete button to remove the selected settings le from the handheld.
84
3
Main Index
5
Section 6 Index
To Next Page
Loading...