Mash Seventy - Chapter 1 Overview Section 5 Number Location; Section 5 Number Location

Chapter 1 Overview Section 5 Number location
1
—
5
Section 5 Number location
The frame (or VIN code) and engine number
are used when registering the motorcycle. This
number can help the distributor to serve you well
when ordering components or entrusting special
services.
The frame number (or VIN code) is stamped
on the right side of the frame standpipe.
As in Fig.1.1.1.
The engine number is stamped on the left side
of the crankcase.
As in Fig.1.1.2.
The metal nameplate is inlayed on the left side
of the frame standpipe, and it is used to mark the
main technical parameters, manufacturer and date
of delivery of this model of motorcycle.
Fig.1.1.3.
Fig 1.1.1
Fig 1.1.2
Fig 1.1.3
Note:
The riding direction of the motorcycle is
the front, and taking this as the standard, the
motorcycle is divided into front, rear, left, and
right.