EasyManua.ls Logo

Mash Seventy - Front Fork Oil

Mash Seventy
223 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Overview Section 6 Recommended fuels and oils
1
7
The quality of engine oil is the main factor that affects
the service life of the engine. Please replace the engine oil
according to the maintenance cycle specified in the
maintenance table. The engine oil should be replaced more
frequently than in the maintenance table when it is run in a
dusty region.
Explanation:
When using in the severe cold conditions in cold regions, it
recommends the users replace with subzero engine oil with high
quality. Please use 10W-30 engine oil of SG grade or 5W-30 engine oil
of SF grade. When running below -35 °C , it is recommended to use
the well-known brand API product: 5W-30 engine oil of SG above
grade.
Warning
The use of low-quality counterfeit engine oil will cause irreparable
loss to the engine and greatly reduce the engine service life.
2.
3
Braking fluid (Only for disc brake)
Specification and classification DOT4
Warning
The braking fluid used in this motorcycle is non-petroleum hydraulic oil.
It cannot be mixed with silicon-based, glycol-based liquids or
petroleum-based liquids, otherwise it will seriously damage the braking
system or even cause braking failure. It cannot use the left hydraulic oil
left over from the last repair, which is because the left hydraulic oil may
absorb the moisture in the air. Only DOT4 braking fluid can be used in
this motorcycle, it should note that the braking fluid used in the
motorcycle should be the same type. Pay attention that there is no
splash oil on the painted surface, otherwise it will attack the substance
on the surface.
4Front fork oil
The front fork oil uses low condensate hydraulic oil 46 #,
330ml each.

Table of Contents

Related product manuals