Chapter 7 Electrical system, Section 4 Starter System and side Stand Ignition Interlock system
Section 4 Starter System And side Stand Ignition Interlock system
STARTER SYSTEM DESCRIPTION
The starter system consists of the following components : the starter motor, starter relay, clutch
lever switch, side stand switch, GP switch, starter switch, engine stop switch, ignition switch and
battery.
Pressing the starter switch (on the right handlebar switch) energizes the starter relay, causing the
contact points to close, thus completing the circuit from the starter motor to the battery.
SIDE STAND / IGNITION INTERLOCK SYSTEM DESCRIPTION
This side stand / ignition interlock system prevents the motorcycle from being started with side
stand down.
The system is operated by an electric circuit provided between the battery andstarter.
The circuit consists of the neutral indicator light and switches.
The starter will work depends on the condition of clutch lever switch, GP switch, starter switch,
engine stop switch, ignition switch.
ECU will control the injector depends on the condition of side stand switch.
To Next Page
Loading...
