Mash Seventy - Page 20

Chapter 2 Periodic maintenance Section 1 Regular maintenance plan
2
—
2
LUBRICATION
Proper lubrication is important for smooth operation and long life of each working part of the
motorcycle.The following maintenance cycles are expressed in miles in order to achieve the ultimate goal of
maintaining the motorcycle in the most economical way
Period
Item
The first time and every 5,000km
Every 10,000km
Throttle cable comp
Engine oil
Lubricant and grease
Throttle handle
—
Grease
Clutch cable
Engine oil
Lubricant
Speedometer transmission axle
—
Lubricant
Speedometer gearbox
—
Grease
Transmission chain
Add engine oil every 1,000km
Braking pedal
Grease or engine oil
Grease
Braking cam shaft
—
Lubricant
Steering rod bearing
Add grease every 2 years or 20,000km
Rocker bearing
Warning：
It should pay attention that on the braking camshaft it cannot apply too much grease. If
the grease gets on the braking pads, there will be slippage.