Mash Seventy - Page 3

PREFACE
SYMBOL
Listed in the table below are the symbols indicating instructions and other information necessary for
servicing and meaning associated with them respectively.
SYMBOL
DEFINITION
SYMBOL
DEFINITION
Torque control required.
Data beside it indicates specified torque
Use fork oil.
Apply oil. Use engine oil unless otherwise
specified.
Apply THREAD LOCK.
Apply SUPER GREASE“A”.
Apply or use brake fluid.
Apply SUPER GREASE“C”.
Measure in voltage range.
Apply GREASE.
Measure in resistance range.
Apply SILICONE GREASE.
Measure in current range.
Apply MOLY PASTE.
Measure in diode test range.
Apply BOND“1215”.
Measure in continuity test range.
Apply THREAD LOCK“1324”.
Use special tool.
Apply GASKET BOND.