MATHERS CONTROLS MicroCommander - 3.2 Remote Control Head Location

THIS PRODUCT IS INACTIVE!
Please contact Mathers Controls for support information.
Page iii
8.4Station Transfer................................................................28
8.5'HI' Idle 'LO' Idle (Optional)...............................................29
8.6Master Station Isolation (Optional).......................................29
8.7Synchronization (Additional Option) .....................................29
9. MORSE CLUTCH AND THROTTLE KIT SELECTION ......................30
9.1Pre-Engineered Throttle Connection Kits ...............................30
9.2Pre-Engineered Clutch Connection Kits .................................30
9.3Outboard And I/O Cable Connection Kits...............................31
10.UNIVERSAL MOUNTING FOR 33C TYPE CABLE..........................31
11.REFERENCES ......................................................................32
11.1 American Boat and Yacht Council (ABYC)............................32
11.2 Code of Federal Regulations .............................................32
11.3 Society of Automotive Engineers.......................................32
11.4 National Marine Manufacturers Association..........................32
11.5 Underwriters Laboratories................................................33
12.PARTS SOURCE...................................................................33
12.1 Anti-Static Wrist Strap.....................................................33
12.2 Circuit Breaker...............................................................33
12.3 Fuse.............................................................................33
12.4 Wago Tool.....................................................................33
12.5 Relay 12 VDC.................................................................33
12.6 Relay 24 VDC.................................................................33
13.SINGLE SCREW CIRCUIT ......................................................35
14.TWIN SCREW CIRCUIT .........................................................37
15.TEMPLATE ..........................................................................39
16.MAINTENANCE ....................................................................41
16.1 Actuator........................................................................41
16.2 Control Head..................................................................41