Matrox 4Sight - Page 133

Manually configuring the Windows NT Embedded registry 133
Enable or disable network
Manually change one key in the registry to enable/disable the
network drivers and components of your Matrox 4Sight unit
under Windows NT Embedded. The key has been initialized to
a default value. The enable/disable setting can be found in the
following registry key:
Registry Keys (INTEL
Ethernet)
Setup
HKEY_LOCAL_MACHINE\
SYSTEM\
CurrentControlSet\
Hardware Profiles\
Current\System\
CurrentControlSet\
Enum\ROOT\
LEGACY_E100E\
0000\CSConfigFlags
Set DWORD to 0 or 1. Use 1
to disable network
components.
Registry Keys (DAVICOM
Ethernet)
Setup
HKEY_LOCAL_MACHINE\
SYSTEM\
CurrentControlSet\
Hardware Profiles\
Current\System\
CurrentControlSet\
Enum\ROOT\
LEGACY_DAVICOM\
0000\CSConfigFlags
Set DWORD to 0 or 1. Use 1
to disable network
components.