Matrox 4Sight overview 19
Chassis The Matrox 4Sight chassis can enclose the Matrox 4Sight
motherboard, up to three PC/104-Plus boards, an optional ATA
(44) hard drive, and fan. Mounting points on the chassis allow
the unit to be secured to other equipment.
Matrox Meteor-II for
PC/104-Plus
The Matrox Meteor-II family of PC/104-Plus boards was
designed for use with a Matrox 4Sight motherboard. The family
comprises:
■ The Matrox Meteor-II /Standard frame grabber for
PC/104-Plus. This is a PCI frame grabber that captures
monochrome video in RS-170/CCIR format, and composite
(CVBS) or component (Y/C) color video in NTSC/PAL format.
It converts them to RGB 8:8:8, YUV 4:2:2, or YUV 4:1:1, with
either square pixels or CCIR-601 resolutions.
■ The Matrox Meteor-II /Multi-Channel frame grabber for
PC/104-Plus. This is a PCI frame grabber that captures
monochrome video or component RGB 8:8:8, RGB 5:6:5, or
RGB 5:5:5 video from standard and non-standard area-scan
cameras.
The Matrox Meteor-II MJPEG expansion module for both of the
above frame grabbers allows you to perform real-time
MJPEG/JPEG compression and decompression of standard
video. This module supports live and archived video feed.
To Next Page
Loading...
