14
BEFORE USE
3
OPTION
Press this key to enter “ADVANCDE SETTINGS”, to enter “TUBE
HEATER”(only for the CE and A11 model), to enter “DIRECT
PRINTING FROM PC” or to enter “DIRECT FILE TRANSFER FROM PC”.
(See8-14: ADVANCDE SETTINGS, 10-3: PRINTING DIRECTLY FROM
“LETATWIN PC EDITOR” or 10-4: SAVING DATA DIRECTLY FROM“
LETATWIN PC EDITOR”)
IMAGE
(SHIFT OPTION)
Press these keys to display the printing image. (See 8-13: IMAGE)
MEMORY
Press this key to operate the “MEMORY” function.
(See 8-17-1: INTERNAL MEMORY)
COPY
(SHIFT MEMORY)
Press these keys to copy the block indicated by the cursor.
(See 8-15-1: COPY)
USB MEM.
Press this key to operate the “USB MEMORY” function.
(See 8-17-2: EXTERNAL MEMORY)
PASTE
(SHIFT USB MEM.)
Press these keys to pastes the copied block to the cursor position.
(See 8-15-2: PASTE)
4
BS
Press this key to delete the character just before the cursor.
INIT.
(SHIFT BS)
Press these keys to Initialize all of the setting data. If any document is
remaining in the [INPUT screen], it is unable to initialize. After deleting the
entire document
.
DELET
Press this key to delete the character on the cursor. Press this key to
initialize user default or factory default value under the function keys menu.
CLEAR
(SHIFT DELET)
Press these keys to delete the entire documents on the [INPUT screen].
5 Ten key Press this key to input numbers, comma and period.
6
/ / /
Press these keys to move the cursor on the [INPUT screen] or change the
setting items under the function keys menu.
SHIFT or
SHIFT
Press these keys to move the cursor to the top or the end of the document.
7 ENTER
Press this key to determine the setting value on the [INPUT screen].
8
BLOCK
Press this key to insert a new “BLOCK” just before the cursor.
EJECT USB
(SHIFT BLOCK)
Press these keys to eject USB memory from the machine, during the
power is ON.
9
CODE
Press this key to input the code number to insert symbols.
(See 7-3: INPUTTING CODE)
When “Chinese” as the screen language is selected, press this key to
allow you to input the Chinese character by using GB or Big 5 code.
DIACR
(SHIFT CODE)
Press these keys to input diacritics for European languages.
(See 7-4: INPUTTING
DIACR)
10 SPACE Press this key to input a space.
To Next Page
Loading...
