Max LM-550A2 Series - Page 32

32
BASIC OPERATION
7. Input C O M . Press BLOCK to create a
new block.
8. As same as “4”, press RPT to set “Repeat” to “2.” Press ENTER .
9. Input X . Press SEQ to set “SEQUENCE.”
(See 8-9: SEQUENCE)
10. Press ENTER to select “10 scale.” Set the
“START NUMBER” and “END NUMBER.”
Input 1 0 0 5 in the “START.”
END NUMBER”.
Input 1 0 0 7 in the “END.”
Press ENTER .
11 Select print range by pressing and .
Press ENTER .
12. Press PRINT .
[PRINTING RANGE setting screen] appears.
(See 9: PRINTING)
14. P
[PRINTING LENGTH ALIGNMENT screen] appears.
r
13. Press . [PRINT SETTING screen]
appears. (
See 9-2: 180° ROTATION PRINT )
ess [NORMAL PRINT].
ENTER
ENTER
Press ENTER to start printing.
15. The printed result is as shown below.
B
B
B
B
B
B
B
B
N
B
B
NORMAL PRINT
180
° ROTATION PRINT