Max LM-550A2 Series User Manual

74
Error message
Contents
Countermeasure
NO ODD NUMBER
WITHIN THE RANGE
There are no odd numbers in the
set serial numbers.
Reset the start and end values or
select [ALL].
NO EVEN NUMBER
WITHIN THE RANGE
There are no even numbers in
the set serial numbers.
Reset the start and end values or
select [ALL].
INITIALIZE AFTER
DELETE ALL FILES
Attempted to initialize the setting
without deleting/clearing the data
in a document.
Implement the initialization of setting
after deleting/clearing the data in the
document.
NO INPUT FILE
Attempted to print without any
text to be printed.
Implement the print after inputting the
texts.
OVERINPUT
CHARACTER SIZE
The input text to be printed is too
big, compared to the size of the
print material.
Reduce the number of lines, reduce
the line space or change the
character size to smaller size.
OVER PRINTING
SIZE
The input text to be printed is too
big, compared to the size of the
print material.
Reduce the number of lines, reduce
the line space or change the
character size to smaller size.
OVER PRINTING
LENGTH
The “PRINTING LENGTH” is too
long.
Reduce the character space,
character width, margin, number of
characters or change the character
size to smaller size. Or change the
print length to longer length.
OVER PITCH
LENGTH
The input text is too long for the
set “PITCH LENGTH”.
Change “PITCH LENGTH”. Or
reduce the character space,
character width, number of
characters or change the character
size to smaller size.
OVER TOTAL PRINT
LENGTH
The total print length is too long.
Tube: maximum 100m
ID PLATE : maximum 5m
Tape: maximum 5m
Reduce the “PRINTING LENGTH”,
such by dividing the file to two files,
or dividing the print range using the
print range setting.
OVER THE NUMBER
OF COPIES
The total print length is too long,
when printing multiple copies.
Tube: maximum 100m
Tape: maximum 7m
Reduce the number of copies.
NO PRINTED
MATERIAL
The consumable has not been
set.
Set the print material.
NO INK RIBBON
Ink ribbon runs out.
Ink ribbon feed is abnormal.
Replace the ink ribbon or
take out the consumables, then set
them again. Then continue printing.
COVER IS OPENED The cover is open while printing.
Printing is not possible when the
cover is open. Close it.
THERMAL HEAD IS
UNUSUAL
Cannot perform printing because
the temperature of the printer
head has increased.
After leaving it for a while, print again.
TROUBLE SHOOTING

Max LM-550A2 Series Specifications

General

Brand	Max
Model	LM-550A2 Series
Category	Label Maker
Language	English