Max LM-550A2 Series User Manual

75
Error message Contents Countermeasure
ERROR IN HALF CUT
OPERATION
Cannot perform printing because
the half cutter unit does not
operate normally.
Feed the printed material or replace
the half cutter unit.
USB MEMORY
UNIDENTIFIABLE
The USB memory has not been
formatted properly.
Try the format again. Only “FAT16” or
“FAT32” format can be used.
The USB memory which has security
feature cannot be used.
NO USB MEMORY
The USB memory has not been
inserted.
Insert the USB memory.
OVER CAPACITY
The USB memory does not have
available space.
Use another USB memory or delete
unnecessary files to create space.
CANNOT RECALL
THIS FILE
Attempted to read a file which is
not compatible with
LM-550A2 series.
LM-550A2 series
can only read files of
“CSV” file format or “LMF” file format.
READ ONLY FILE
Attempt to overwrite or delete
the existing read-only file in the
USB memory.
To overwrite or delete the read-only
file, change its property to rewritable
file on a personal computer.
PRIOR TO START
PRINTING, LOAD THE
MATERIAL
(TUBE/TAPE)
Attempt to start printing from
“LETATWIN PC EDITOR” on a
computer, without setting the
print material in the
LM-550A2 series.
Set the print material, prior to start
printing.
[PC CONNECTION]
DATA ERROR
The data received from a
computer is abnormal.
Unable to receive the data from other
than “LETATWIN PC EDITOR”.
Press ESC and check USB
connection with PC, then try again.
[PC CONNECTION]
COMMAND ERR
BATTERY VERY LOW
OR
T
Battery is low
Set the eneloop standard model
[BK-3MCC] (recommended) with the
remaining charge in the battery.
he command received from a
computer is abnormal.
Unable to receive the command from
other than “LETATWIN PC EDITOR”.
Press ESC and check USB
connection with PC, then try again.
TROUBLE SHOOTING

Max LM-550A2 Series Specifications

General

Brand	Max
Model	LM-550A2 Series
Category	Label Maker
Language	English