119
Controls in detail
Locking and unlocking
앫 In order to start the engine with the
SmartKey with KEYLESS-GO:
앫 The SmartKey with KEYLESS-GO
must be located in the vehicle.
앫 The brake pedal must be firmly
depressed. Do not depress the ac-
celerator.
앫 If the SmartKey with KEYLESS-GO is
positioned farther away from the ve-
hicle, the system may no longer rec-
ognize the SmartKey with
KEYLESS-GO. The vehicle then cannot
be locked or the engine started via
the KEYLESS-GO system.
앫 If the SmartKey with KEYLESS-GO is
removed from the vehicle (e.g. if pas-
senger exits the vehicle with the
SmartKey with KEYLESS-GO).
앫 when pressing the KEYLESS-GO
start/stop button or trying to lock
the vehicle with the outside door
handle the message
KEY NOT
DETECTED
appears in the multi-
function display
앫 with the engine running, the mes-
sage
KEY NOT DETECTED
appears in
the multifunction display while
driving off.
Find the SmartKey with KEYLESS-GO
or change its present location imme-
diately (e.g. place it on the front pas-
senger seat or insert it in shirt
pocket).
앫 If you have started the engine with
the KEYLESS-GO start/stop button,
you can turn it off again with:
앫 the KEYLESS-GO start/stop button
앫 the SmartKey inserted in the start-
er switch, when gear selector le-
ver in position P
앫 Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside
the vehicle.
Possibility 1: (One SmartKey with
KEYLESS-GO in the vehicle, one
SmartKey with KEYLESS-GO outside
the vehicle): If you leave the
SmartKey with KEYLESS-GO behind
when exiting and locking the vehicle,
no message appears in the multifunc-
tion display.
Possibility 2: (One SmartKey with
KEYLESS-GO in the vehicle, no
SmartKey with KEYLESS-GO outside
the vehicle): When exiting and trying
to lock the vehicle, the message
KEY
STILL IN VEHICLE
appears in the mul-
tifunction display. The vehicle will
not be locked.
To Next Page
Loading...
