EasyManua.ls Logo

MAYBACH 62 S - Locking the Vehicle

Default Icon
466 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
402
Practical hints
Unlocking/locking in an emergency
Unlocking and opening the trunk
A minimum height clearance of 6.2 ft
(1.89 m) is required to open the trunk lid.
Insert the mechanical key 1 into the
trunk lid lock until it stops.
Turn the mechanical key 1 counter-
clockwise to position 2.
The trunk unlocks.
Pull on handle 3.
The trunk opens.
! The trunk lid swings open automatically.
Always make sure there is sufficient overhead
clearance.
Turn the mechanical key 1 back and
remove it from the trunk lid lock.
If you cannot lock the vehicle with the
SmartKey or KEYLESS-GO**, do the fol-
lowing:
Close the front passenger door, the
rear doors and the trunk.
i If you cannot close the trunk with the re-
mote trunk opening/closing switch, lower the
trunk lid manually and close it with hands
placed flat on the trunk lid until it is engaged
in its lock.
Press the central locking switch on
the center console (
page 129).
Check to see whether the locking
knobs on the doors have moved
down.
If necessary, push them down manu-
ally.
Remove the mechanical key from the
SmartKey ( page 401).
Check whether the trunk is locked.
If necessary, lock the trunk with the
mechanical key (
page 127).
Except for the driver’s door, the vehi-
cle should now be locked.
Insert the mechanical key 2 into the
driver’s door lock until it stops.
Turn the mechanical key 2 clockwise
to position 1 until the locking knob
moves down.
The driver’s door is locked.
i This procedure does not arm the anti-
theft alarm system, nor does it lock the fuel
filler flap.
1 Mechanical key
2 Unlocking in an emergency
3 Handle
Locking the vehicle
1 Locking
2 Mechanical key

Table of Contents

Related product manuals