364
Practical hints
What to do if …
Warning and malfunction messages ap-
pear in the multifunction display located
in the instrument cluster.
Certain warning and malfunction mes-
sages are accompanied by an audible sig-
nal.
Address these messages accordingly and
follow the additional instructions given
in this Operator’s Manual.
Selecting the vehicle status message
memory menu in the control system
(
컄 page 169) displays both cleared and
uncleared messages. If the message
memory menu is not displayed, there are
no messages.
High-priority messages appear in the
multifunction display with in red color.
Certain messages of high priority cannot
be cleared from the multifunction dis-
play using reset button J (
컄 page 154)
or button j, k, ÿ, or è on the
multifunction steering wheel
(
컄 page 158).
Other messages of high priority and mes-
sages of less immediate priority can be
cleared from the multifunction display
using reset button J (
컄 page 154) or
button j, k, ÿ, or è on the
multifunction steering wheel
(
컄 page 158). They are then stored in the
vehicle status message memory
(
컄 page 169). Remember that clearing a
message will only make the message dis-
appear. Clearing a message will not cor-
rect the condition that caused the
message to appear.
i Switching on the ignition causes all instru-
ment cluster lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) as well as the multi-
function display to come on. Make sure the
lamps and multifunction display are in work-
ing order before starting your journey.
On the pages that follow, you will find a
compilation of the most important warn-
ing and malfunction messages that may
appear in the malfunction display.
High priority messages appear in red
color.
For your convenience the messages are
divided into two sections:
앫 Text messages (컄 page 365)
앫 Symbol messages (컄 page 376)
Vehicle status messages in the multi-
function display
Warning! G
All categories of messages contain impor-
tant information which should be taken
note of and, where a malfunction is indi-
cated, addressed as soon as possible at an
authorized Maybach Studio.
Failure to repair condition noted may
cause damage not covered by the Maybach
Limited Warranty, or result in property
damage or personal injury.
Warning! G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see in-
formation about your driving conditions,
such as speed or outside temperature,
warning/indicator lamps, malfunction/
warning messages or the failure of any sys-
tems. Driving characteristics may be im-
paired.
If you must continue to drive, please do so
with added caution. Bring the vehicle to
your authorized Maybach Studio as soon
as possible.
To Next Page
Loading...
