MAYBACH 62 S - Panic Alarm; Activating; Deactivating

102
Safety and Security
Panic alarm
1 Â Panic button
i USA only:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful inter-
ference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause harmful inter-
ference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
왘
Press and hold  button for at
least 1 second.
An audible alarm and flashing exteri-
or lamps will operate briefly.
왘 Press  button again.
or
왘 Insert the SmartKey or SmartKey with
KEYLESS-GO** in the starter switch.
or
왘 Press the KEYLESS-GO** start/stop
button (
컄 page 61).
The SmartKey with KEYLESS-GO must
be inside the vehicle.
Panic alarm
Activating
Deactivating