340
Operation
Maintenance
Clearing the maintenance service indica-
tor message
The maintenance service indicator mes-
sage is automatically cleared after ap-
proximately 30 seconds when you switch
on the ignition or when reaching the
maintenance service threshold while
driving.
You can also clear it yourself.
1 Reset button J
왘 Press reset button J 1 on the instru-
ment cluster.
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display (
컄 page 157).
Maintenance service term exceeded
If you have exceeded the suggested
maintenance service term, you will see
the following message in the multifunc-
tion display example service A):
'A' SERVICE
EXCEEDED BY
XXXX MI
(Canada:
XXXXX KM
)
'A' SERVICE
EXCEEDED BY
XXX DAYS
'A' SERVICE
EXCEEDED BY
X DAY
In addition, a signal sounds when the
message appears.
Any authorized Maybach Studio will re-
set the maintenance service indicator fol-
lowing a completed maintenance
service.
You can call up the maintenance service
indicator display at any time to check
when the next maintenance service is
due.
왘 Switch on the ignition (컄 page 60).
왘 Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display appears in
the multifunction display
(
컄 page 157).
왘 Press button k or j until the
maintenance service indicator display
with the service symbol 9 or ´
and the service deadline appear in
the multifunction display.
i If the battery is disconnected, the days of
disconnection will not be included in the
count shown by the maintenance service indi-
cator. To arrive at the true maintenance ser-
vice deadline, you will need to subtract these
days from the days shown in the maintenance
service indicator display.
Do not confuse the maintenance service indi-
cator with the engine oil level indicator :.
Calling up the maintenance service in-
dicator display
To Next Page
Loading...
